Corner Strap

Corner Strap Fiber Reinforced Polymer

The pre-preg, pre-cured corner straps are designed based on steel plating systems.

PRODUCT SPECIFICATIONS:

Product Description

They follow ACI design guideline in being slightly less than 90 degrees. (The function of bend amount is to carry load around corner.) This has the advantage over wet lay up systems in that the bend is certified in factory. The corner product represents a low profile bearing tendon to distribute load horizontally.

The pre-preg, pre-cured corner straps are designed based on steel plating systems. They follow ACI design guideline in being slightly less than 90 degrees. (The function of bend amount is to carry load around corner.)This has the advantage over wet lay up systems in that the bend is certified in factory. The corner product represents a low profile bearing tendon to distribute load horizontally. Corners can be produced in various plates or solid carbon,glass aramid or grids.Tensile strength and modulus are a function of tow size and layers.

Advantages

  • Low profile and can be installed behind brick facade or other building facades.
  • Legs or overlaps can be added to extend loads
  • Parge coats and painting can be used for aesthetics
  • Installs in same fashion as straight carbon plate or grids
  • Reduces or illuminates contractor error in bending FRP to far to carry load
  • Peel-ply technology on both sides for increased bonding capabilities

View schematic use and details

We're Here To Help

Fortec Stabilization welcomes your input, questions, and feedback. If you have any questions about our products, their applications, technical information, or anything else, please do not hesitate to contact us. We will try to respond to your inquiry within 24 hours.